Made to order
Tesla T4/P4 active cooler

You can now use your Nvidia Tesla T4 or P4 in tiny the Lenovo ThinkCentre Tiny, Minisforum MS-01/MS-A2 or other cases that only allow low-profile, single slot cards! Replace the original cooler with this full copper, single slot active cooler, and you're good to go.

The Tesla T4 and P4 come without fan header. To use the fan, you will need to provide a 12V power source and preferably a way to control the fan speed (PWM or voltage). This card comes with an adapter to attach the fan to a regular motherboard 4-pin fan header. If you're looking to use this cooler in the Minisforum MS-01, read more here.

This product is made to order and has a lead time of 2-3 weeks.

85,00 €
Taxes and Shipping cost calculated during checkout.
  • US customers pay tariffs upfront and will not be charged during import.
  • EU customers pay their local VAT rate. Companies outside of Belgium with a valid VAT number are eligible for intra-community delivery (0% VAT).
  • Other customers pay local taxes to the carrier during import.

Active cooling for the Nvidia Tesla T4 and P4

The Nvidia Tesla T4 and P4 are originally intended to be used in racks and servers so come without active cooling. With this cooler, you can use these cards in cases that don't come with very high natural airflow like rack servers. This makes them a very good option for small gaming machines, tiny Proxmox servers & clusters, Plex, AI computing, etc.

Specifications

  • Material: Copper base and cooling fins, stainless steel shroud
  • Dimensions: 170mm x 52mm x 13.5mm
  • Weight: 300 grams
  • Compatibility: Nvidia Tesla T4 or Nvidia Tesla P4
  • GPU dimensions after replacing heatsink: 170mm x 69mm x 20mm
  • Fan: 55x55x8 PWM, hydraulic bearing
  • Fan speed: 6000 RPM @ 100% PWM
  • Included:
    - Cooler
    - Mounting screws
    - Thermal pads for the memory
    - Fan header adapter
    - T6 and T8 screwdriver
  • Requirements:
    - Nvidia Tesla T4 or Nvidia Tesla P4
    - Motherboard fan header or 12V power source
    - Phillips screwdriver (PH1 preferred)
    - Thermal compound of your choice

Installation guide 

Important information

Replacing the cooler of your graphics card will void the warranty, doing so is your own responsibility. Use this cooler at your own risk, I cannot be held responsible for damage to your card during installation or usage of this cooler.