Single slot RTX PRO 4000 Blackwell SFF
Single slot RTX PRO 4000 Blackwell SFF
Single slot RTX PRO 4000 Blackwell SFF
Single slot RTX PRO 4000 Blackwell SFF
Single slot RTX PRO 4000 Blackwell SFF
Single slot RTX PRO 4000 Blackwell SFF
Single slot RTX PRO 4000 Blackwell SFF
Single slot RTX PRO 4000 Blackwell SFF
  1. Graphics Card Coolers
  2. RTX PRO 4000 Blackwell SFF Single Slot Cooler
4.8
(5)

Transform your dual-slot RTX PRO 4000 Blackwell SFF into a true single-slot, low-profile card. Precision skived and CNC-milled from solid copper with a stainless steel shroud, this thermal solution replaces the factory cooler, enabling a massive 24GB VRAM compute power in tight chassis like the Minisforum MS-01/MS-A2, Lenovo ThinkCentre Tiny, and high-density 1U server racks.

89,00 €
Taxes and Shipping cost calculated during checkout.
  • US customers pay tariffs upfront and will not be charged during import.
  • EU customers pay their local VAT rate. Companies outside of Belgium with a valid VAT number are eligible for intra-community delivery (0% VAT).
  • Other customers pay local taxes to the carrier during import.
RTX PRO 4000 SFF cooler

24GB VRAM in a single slot

This custom cooling solution transforms your dual-slot GPU into a true single-slot, low-profile powerhouse. The cooler allows you to have a whopping 24GB of VRAM in the tightest SFF builds, 1U server chassis, and high-density homelabs. It features a full copper baseplate and finstack with a stainless steel shroud. It is perfect for small gaming machines, tiny Proxmox servers & clusters, Plex, AI computing, etc.

  • Unmatched GPU density: Converts dual-slot cards into a true single-slot form factor to double your compute capacity.
  • 100% pure copper heatsink: Skived and CNC-machined for optimal thermal dissipation under heavy workloads.
  • Easy drop-in replacement: Precision-engineered to fit the original PCB for a seamless and hassle-free conversion.

 

Specifications

  • Material: Copper base with 0.3mm fins, stainless steel shroud
  • Dimensions: 170mm x 55mm x 13.5mm
  • Weight: 300 grams
  • Compatibility: RTX PRO 4000 Blackwell SFF (Is my GPU compatible?)
  • GPU dimensions after replacing heatsink: 170mm x 69mm x 20mm
  • Fan: 55x55x8 PWM, hydraulic bearing
  • Fan speed: 7000 RPM @ 100% PWM
  • Included:
    - Cooler
    - Low-profile PCIe bracket
    - Standard height PCIe bracket
    - Mounting screws
    - Thermal pads for the memory
  • Requirements:
    - RTX PRO 4000 Blackwell SFF
    - Thermal paste of your choice for the chip (included in Install kit add-on)
    - T5, T6 & T8 screwdriver (included in Install kit add-on)

Installation guide

Important information

Replacing the heatsink of your graphics card can void the warranty, doing so is your own responsibility. Use this heatsink at your own risk, n3rdware cannot be held responsible for damage to your card during installation or usage of this heatsink.

Reviews

Dan United States
Verified customer
5
Super Easy install, ive never modded a cooler and was able to get this installed myself. Reset the fan curve if you are running in a MS A2, and make sure to take out the port cover on the shell. Mine runs at 79-81C at full load for extended times and that's where it tops out which is fine by me. Such a unique setup for a small but powerful rig that's running at around 200 watts at full tilt. Perfect for running offline agentic AI. 10 out of 10.
Robin Schaumburger Austria
Verified customer
4
Hey there, i wanna say that i really love companys/people who try to make modifications like that on Cards like that. I am honest, i was struggeling a little bit because i ran into some problems. I have remounted already a lot of Cards in my life so i want to make it real. There are two major things i would like to point out. 1.: The included Thermalpads for the VRAM chips are a litttttle too small. I had too less pressure on it so the temps on the VRAMS went to 120° degrees real fast. But i solved that by putting another very small layer of pad of my own. After that it was fine.
2.: On the Original Cooler of the card there are two important power stages (near the fan) what are not cooled by the copper cooler. What i believe are important to include. Also there are no Thermal pads for the front power stages of the cards where i also had to use my own and trying to find the right size. The screw holes are not perfect, they are "okay". But i do understand that it is hard to make a product like that and still trying to make a profit out of it. So still will give it a 4 out of 5. I really would like a 2 slot cooler for this card what makes it really chill. Sadly that one is not in stock.

I love it anyway and will be happy to try another product of you guys again one day.

Best regards
Schaumi
Gabriel Cosi Germany
Verified customer
5
Incredible product, 100% recommended
Mark Australia
Verified customer
5
Fantastic high quality product. Definitely recommend getting the fitting kit. Fits minisforum ms-a2 like a charm.
Conrad Dobrowolski United States
Verified customer
5
It's a stellar product, I would get it again

Related products