5.0
(7)
You can now use your Nvidia RTX PRO 2000 Blackwell in extremely small cases like the Lenovo ThinkCentre Tiny, Minisforum MS-01/MS-A2 or other cases that only allow low-profile, single slot PCIe cards! Replace the original cooler with this full copper, single slot version, and you're good to go.
Please allow about 1 week to assemble, package and ship your cooler.
89,00 €
Taxes and Shipping cost calculated during checkout.
- US customers pay tariffs upfront and will not be charged during import.
- EU customers pay their local VAT rate. Companies outside of Belgium with a valid VAT number are eligible for intra-community delivery (0% VAT).
- Other customers pay local taxes to the carrier during import.
Tiniest possible RTX PRO 2000
Taking just a single slot, this cooler converts your card to the tiniest possible RTX PRO 2000 Blackwell. It features a full copper baseplate and finstack with a stainless steel shroud. It is perfect for small gaming machines, tiny Proxmox servers & clusters, Plex, AI computing, etc.
Reviews
Mika
Verified customer
5
Just barely fits a Lenovo P330 tiny from ages ago with some convincing. It's quiet and keeps the gpu cool while running AI workloads. The guide was easy when I actually read it and didn't try to reuse parts I wasn't supposed to. Took about 30 mins to install.
Lukas
Verified customer
5
Excellent product, compatible with GPU, provides adequate cooling.
Alex
Verified customer
5
Everything worked as expected. I changed the cooler and installed the card in my dell r630. Right now with temps in room at 31C (outsode 35C) the card runs at 39C idle.
Thank you very much for such an amazing product!
Thank you very much for such an amazing product!
Jimmy Joe McGurl
Verified customer
5
N3rdware's single slot coolers are friggin amazing!! I've been able to turn my mini PC into quite the gaming beast given it's tiny form factor! Absolutely recommend these things! A couple things to note: If you're using this on the MS-01 from Minisforum, you may have to go into the bios and change the PCIE slot setting to gen4, as it somehow may be set to gen5 when this card is inserted, despite the PC supposedly only supporting Gen4. Once you do this everything should work great, and as far as setting a fan curve, this is basically not optional. I had not done this before, and if you're inexperienced in this, like me, I assure you it's not too hard, you've already swapped the cooler, so you've done the hardest part. Just follow the instructions for changing the fan curve, and make sure to set your PC so that whatever fan curve software you're using launches when you boot the PC. Also double check that the setting you picked starts by default when the software boots. The card will run too hot in the MS-01 without the fan curve adjustment, but it runs perfectly once you've adjusted the fan curve.
Octavian
Verified customer
5
This is a good product, nothing else on the market like it! The card is going a bit hot when in use in a minisforum ms-01, but nothing else wrong with it! Keep it up! You are doing a good job!