Made to order
RTX A2000 copper cooler
RTX A2000 copper heatsink
RTX A2000 copper heatsink
RTX A2000 copper heatsink
RTX A2000 copper cooler
RTX A2000 copper heatsink
RTX A2000 copper heatsink
RTX A2000 copper heatsink
  1. Components
  2. RTX A2000 Copper Cooler

RTX A2000 copper cooler

5.0
(11)

This full copper cooler replaces the noisy stock Nvidia RTX A2000 cooler and is compatible with the two 60mm fans. It is both quieter and cooler than the stock Nvidia RTX A2000 cooler.

This product is made to order and has a lead time of 2-3 weeks.

85,00 €
VAT and shipping cost excluded
Click on the shipping cost link to see local shipping rates. VAT is calculated during checkout. EU customers pay their local VAT rate, customers outside of the EU don't pay VAT but pay local taxes to the carrier during import.

Are you annoyed by the noisy Nvidia RTX A2000 cooler?

I know I was! Aiming for a solution that was inaudible under load, I came up with this copper heatsink. It used the stock mounting system but replaces the tiny heatsink with a large copper radiator.

Just add two 60 mm fans of your own choice. If you want to stay within the 2-slot design, take 10 mm thick fans. If you have more clearance, like the Yocto provides, the best option is double Noctua fans.

It's not just quiet, it's cool!

Not only the acoustics benefit a lot from swapping to this heatsink and proper fans, the thermals also do. With the dual Noctua fans, the card will not go above 68C with the cards spinning at a mere and inaudible 1800 RPM.

The heatsink also comes with much better quality thermal pads, which keep the memory up to 20C cooler.

This gives a lot of headroom for overclocking or even shunt-modding the card.

Specifications

  • Material: 100% pure copper
  • Dimensions: 120mm x 60mm x 20mm
  • Weight: 450 grams
  • Included:
    - Mounting screws for the heatsink and PCI bracket
    - Thermal pads for the memory
    - T6 and T8 screwdrivers to replace the heatsink
  • Motherboard compatibility: Mini ITX or PCIe riser only
  • Fan compatibility: two 60mm fans.
    With 10mm thick fans, the card stays within 2 slots
    With 15mm thick fans, the card will be 2 slots + 2mm
    With 25mm thick fans, the card will be 2 slots + 12mm

Advised 25mm fans: Noctua NF-A6x25, Noiseblocker BlackSilent Pro, SilverStone FTF 6025
Advised 15mm fans: Noctua NF-A6x15, Gelid Silent 6
Advised 10mm fans: Evercool EC-6010, StarTech.com 60x10

It is recommended to connect the fans to your motherboard rather than the card fan header, because it has a minimum RPM of 3000. Fan speed can be controlled by software like Fan control.

Installation guide

Important information

Replacing the heatsink of your graphics card can void the warranty, doing so is your own responsibility. Use this heatsink at your own risk, I cannot be held responsible for damage to your card during installation or usage of this heatsink.

Case compatibility

This cooler is developed for the Yocto case but can be used in many other cases. The Yocto has its own mounting holes for the fans, so you will have to find a way to mount them in a different case. Double-sided tape, tie wraps or friction fitting between the case and heatsink all work well.

Here are some of the popular low profile cases that are compatible with this cooler:

25mm thick fans

  • Silverstone ML06-E
  • Silverstone ML09
  • Lazer3D CG7 Cravo
  • J-Hack Stratos X
  • J-Hack Pure MK2
  • ZS Cases ZS-D2
  • Goodisory A02
  • Metalfish S2
  • Metalfish Metal Solid
  • SKTC A10

15mm thick fans

  • Lone L5
  • Lazer3D HT5
  • J-Hack Pure X
  • LZmod LZ-A4 A24-V5
  • Chieftec BU-12B

Reviews

Nate United States
Verified customer
5
Cooler works wonders!! Keeps the card cooler and so much quieter than the stock cooler. I had a small issue with the first heatsink not fitting properly and submitted an inquiry. Very prompt response and sent a replacement even though it was past the warranty period!! Great product and amazing service. Will absolutely come back for other products!
Henry United Kingdom
Verified customer
5
Great produce and excellent install guide on the website. Installed the A2000 heatsink and temperatures reduced as advertised.
jez France
Verified customer
5
Christian Belgium
Verified customer
5
Installed your heatsink in combination with a copper mod on the memory. Result is insane, 24C lower temperature. Great product, thanks.
Michael Chu United States
Verified customer
5
I love this cooler, it was super easy to install and is much quieter than the stock heat sink

Related products